Hello everybody,
The Airpointer housing comes in 3 different sizes: 2D, 4D, and HC. Some housings can hold a PM monitor, others can't. Some can handle very high outside temperatures, but not all of them. Some can have 2 analyzers in one drawer, but it depends on several parameters...
You are confused? Then go to https://www.airpointer.tech/airpointer-base-unit/, download the excel file, answer the 4 questions, and it will tell you what you need.
Regards,
Kevin.
Just check here: https://www.airpointer.tech/datalogging-protocols/
Here I have added and will maintain the lists of instruments supported.
With best regards
Andreas
The BTEX module has evolved a lot during the year 2018. Therefore, we wrote a brand new manual!
It can be downloaded there:
https://www.airpointer.tech/manuals/
Regards,
Kevin.
Changing place is a big task for a company, the development office is finished as you can see on the picture above. The colleagues from production have the bigger part, they are working heavily to setup production again.
Your new address is:
mlu-recordum
Environmental Monitoring Solutions GmbH
Werner Heisenberg-Str. 4
2700 Wiener Neustadt
Austria
With best regards
Andreas
Yesterday partners from Belarus, Ukraine and Poland (hopefully) enjoyed the training on airpointer. I am sure they and also we will benefit from the improved knowledge.
Welcome to the club!
Andreas
In Maintenance/How to.../Preventive maintenance procedures, you can now find many procedures explaining how to take care of your airpointer to keep it running smoothly 🙂
https://www.airpointer.tech/preventive-maintenance-procedures
In Documentation/electronics/boards, you can now find the jumper settings needed for all the boards of the Airpointer in a single document: Jumper list
Kevin was happy to do a training for two new technicians from Italy the last two days. Riccardo and Paolo will do their first airpointer installation in the next weeks and I am sure they will do it perfect.
Welcome to the club!
Andreas
Many schematics are now available:
The electrical wiring diagrams of the base units (4D and HC) and for the 5 most common airpointer modules (O3, CO, SO2, NOx, H2S):
https://www.airpointer.tech/electrical-wiring-diagrams/
And the pneumatic diagrams, also for the base units and for the 5 most common airpointer modules (O3, CO, SO2, NOx, H2S):
https://www.airpointer.tech/pneumatics/
All these documents are in pdf format and can either be viewed online or downloaded.
Best regards,
Kevin Clarke.
Today I made a new version of BoardConfig!
Now the configuration of CaliControl is possible, this was missing before.
Download “BoardConfig” BoardConfig.exe – Downloaded 2913 times – 26,64 MB
With best regards
Andreas
